Description
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
Additional Information
style: |
A |
Main material: |
Stainless Steel |
Steel code: |
1.4034 |
locating pin: |
hardened |
D: |
8mm |
D1: |
M16x1.5 |
D2: |
33mm |
L: |
77mm |
L1: |
26mm |
L2: |
10mm |
L3: |
23mm |
Travel S: |
8mm |
SW1: |
19mm |
Fx30°: |
2.3mm |
Spring force initial pressure F1 approx. N: |
15mm |
Spring force final pressure F2 approx. N: |
35mm |
